When used correctly, vacuum bags for things help free up to 25% of the additional volume in the cabinet without causing significant damage to the material. The design itself consists of a plastic bag with a valve and a hermetically sealed seam. The operation procedure of the device is as follows:

1. We lay out clean and dry things in packages of the appropriate size. In this case, the product must be turned out so that the buttons, zippers and buttons do not come in contact with the surface of the plastic. .
2. We distribute the material evenly so that dense rollers and voids do not form. The permissible weight of the products is usually indicated on the package itself, but on average it should not exceed 15 kg. We make sure that the plastic does not stretch, but freely fits objects.
3. After preparation, we are engaged in sealing. To do this, we release air to the maximum and fasten the sealed seam, passing through it several times.
4. Then we open the valve, apply a tube from the vacuum cleaner to it and remove the air using the most low-power mode. Hand press things slightly, then the air will come out evenly. Carefully close the valve.
5. The finished package should be approximately halved in volume. We put it on the desired shelf or hang it by the hook.

It should be noted that even clean and fresh linen packaged in this way cannot be stored without airing for more than six months. It is not necessary to shake all the products. It is enough to let air into the bag, make sure that unpleasant odors do not come from things and pack it again.