How and how to remove grease stains from the surface on a leather, bologna or down jacket at home

In preparation for the cold months, the housewives remove suede, bologna, down and leather jackets from the cabinets, often revealing greasy dirt on their surface. Before removing stains from a down jacket or other outerwear with the help of dry cleaning professionals, you can try to cope with the problem yourself.

It is worth considering that after a thorough washing, such oily formations can become even more obvious, so you need to approach the processing of products wisely, adhering to a certain sequence of actions. First, you need to choose the optimal tool, based on the material and its features.

Leather Impact Options

The oily stain on the surface of the jacket made of soft leather looks just awful, and after traditional washing it only spreads or gives several additional areas of contamination. If you act correctly, then you can remove it quickly and without negative consequences for the material.

Tip: If the formation is completely fresh and did not have time to turn into a film, then it can be eliminated with wet and dry wipes. First, take a dry product and blot it with a dirty surface, repeating this several times until the cloth remains clean. After that, we take a wet towel and remove any residual dirt, moving from the periphery to the center.

To remove persistent greasy stains from a leather jacket, you can use one of the following methods:

• Take a little corn or potato starch, dilute with boiled water to a pulp state. The resulting composition is distributed in a very thin layer over the surface of the stain and left for several minutes. Fat must be completely absorbed into the starchy substance. Then remove the mass with a damp cloth and dry the product.
• Talc, soda, baby powder, small salt and chalk also perfectly absorb fat, but only if it is in liquid form. Sprinkle the selected area with the selected powder and wait until the crystals absorb the product. You can use steam or hot water to pre-melt the fat.
• Household soap does a good job of greasy stains at home. It can be used during or after washing. When working with the skin, there are only two features: the use of hard brushes is prohibited, the soap must be thoroughly washed, otherwise the coating will remain on the surface.
• Stains on fair skin can be removed with lemon juice. For dark and color products, it is better to take onion juice. Just cut the selected product and carry out a cut several times on the spot. Wet the remaining liquid with dry wipes.

The above methods are not at all aggressive, but with the wrong approach or abuse of the compounds and they can spoil the material. If the product is expensive, it is best to start with normal washing and, if necessary, consult a specialist.

How can I quickly and safely clean a bologna jacket or down jacket?

Down and bologna jackets are often greasy during storage, and the characteristic greasy stains after traditional washing do not go away, but become even more noticeable. Today, there are several popular approaches that can get rid of the problem in the shortest possible time.

If it was not possible to remove the pollution, then we use one of the following options:

1. We dilute a tablespoon of washing powder by the color of the product in half a liter of warm water. The resulting liquid is applied to the stain so that it is soaked through. If possible, then it is necessary to provide access to the fabric from two sides.In this case, we act from the wrong side, laying the “face” with a soft flap. After a few minutes, we treat the area with a soft brush or sponge. After this, we wipe the fabric with a cotton swab dipped in vinegar. Then we wash the product and then evaluate the results of washing.
2. The use of such finished products as Antipyatin and Lok gives a good effect. We use them according to the instructions, not exceeding the recommended exposure times.
3. Grease stains from a down or bologna jacket can be removed with tooth powder. We take a little powder, apply it to the stain and rub it lightly with a soft-bristle brush. If the fat is old, then apply a little water to the composition. Then we apply a sheet of white paper to the treated area, which we press with a heavy iron. After a day, we disassemble the structure and clean off the remaining powder. After that, remove minor stains with a traditional wash.

The effectiveness of these approaches in the fight against perennial stains is very doubtful. In such cases, you have to use solvents, but they can adversely affect the structure of the material.