How and what is the best way to clean the watch bracelet depending on the material?

Properly selected watches look stylish. But lovers of this accessory should know how to clean a metal watch bracelet or strap from another material. After all, even with a careful sock, particles of skin remain on it, sweat is absorbed, and other impurities are possible. At home, just putting them in order is enough. But the mechanism is better to entrust the master.

Metal bracelet cleaning

The method of cleaning the watch depends on the material. If the strap is leather, then not all procedures available for a stainless steel product are suitable for it. And with a gold bracelet you need to be especially careful.

If possible, the strap must be separated from the watch. Then it will be more convenient to operate, because the risk of water and detergent getting into the mechanism will disappear. To clean a metal product, warm water is recommended, in which dishwashing detergent or the most common shampoo is added. Use it like this:

• poured into a shallow container;
• immerse the watch strap in it and leave it for half an hour;
• then they take it out and wipe it with a polishing cloth or just a soft, lint-free;
• fold and unfold several times to reach hard-to-reach corners, it is there that dead skin particles and dirt tend to accumulate;
• with a toothpick you can clean the most difficult places;

Before use, you must completely dry the bracelet with a soft cloth or just in the air.

If the watch has lost its luster, then it can be returned in this way: give the form of a bowl to aluminum foil, put a bracelet in it, then pour baking soda and add hot water. Leave for half an hour, then remove and wipe so that there are no stains. The same effect will result if you mix water and ammonia.

You can cook a special paste to wipe the clock: combine soda and vinegar in equal proportions. The same tool will come in handy if you have a question how to clean a titanium watch bracelet or a precious metal product.

How to tidy a leather strap?

Leather straps are popular. Caring for them will not be difficult if you do this regularly.

As with a metal bracelet, a soap solution will do. To enhance the effect, you can add a little bit of ammonia. This mixture should be applied to a cotton pad and use it to clean the accessory. Then it should be washed off - for this it is convenient to use wet wipes - and dried with a towel. Then it is recommended to lubricate the product with a small amount of olive oil. This measure will help soften the skin and protect it.

To clean the leather bracelet of a white watch, you can use an egg and milk. To do this, stir the protein in a glass of the drink, after which the strap is processed using a cotton swab. Thus, two goals are achieved: pollution is removed and the original radiant appearance is returned.

A bracelet made of fabric must also be maintained in order. It is easy to care for him: you need to wash it in water, in which soap or any other detergent has been added, and to clean especially dirty places with a toothbrush.

What to do with a bracelet made of gold, titanium or ceramic?

Gold watches need the same care as other products from this metal. It is soft enough, so that with excessive zeal it can be scratched. Therefore, one must act carefully, but being careful.It is convenient to use a toothbrush, the bristles of which penetrate even into hard-to-reach places of the watch. Just choose the best baby, very soft. It should be moistened with water, then walk along the entire bracelet, pressing not too hard.

Tip

Gold watches can be polished using regular cosmetic powder, applied to a soft cloth.

If you clean the gold watch, the bracelet using ordinary water failed, then the use of toothpaste is allowed. The foam on the brush may soon darken. This should not cause concern: in this way the dirt comes off, quality products can not be damaged in this way. Toothpaste must be completely removed after the procedure: if the watch has metal parts, then they will begin to rust.

When the bracelet is so dirty that the usual products did not help, you can try using a lubricant, for example, WD-40. A drop of the substance should be applied to the stained area of ​​the bracelet or watch, wait a couple of minutes and wipe with a soft cloth. Residues should be washed off well.

The titanium watch is lightweight and looks stylish. No wonder they are popular. They can be cleaned just like gold ones. Titanium is a soft material, so scratches can appear on the watch during wear. Minor damage is easy to clean on your own. You should take a regular school eraser and hold it several times on the strap in one direction. The view will immediately improve.

If the question arose, how to clean a ceramic bracelet on a watch, then it is very simple to do. The material is resistant, not susceptible to corrosion and other damage. It is enough to wipe the bracelet with a soapy cloth so that it takes its original form.

The watch brings a stylish touch to any look. If you take care of them correctly, then they will last a long time.