How to wash the filter in an aquarium: rules and terms of work

Why is it important to clean the filter in the aquarium? The life of the inhabitants of the tank depends on the condition of this part. The filter carries out mechanical, chemical and biological cleaning. Pay due attention to this system to maintain balance in the aquarium for a long time.

How often to wash

Filter task in an aquarium - purification of water from food debris, waste products of fish and other organics. If you do not wash it, it becomes clogged with filtered debris and becomes less effective. At some point, the dirty block begins to act the other way around - it releases hazardous substances into the water. If you ignore the condition of the filter, the health of the inhabitants of the aquarium will be in jeopardy.

The procedure is divided into two subspecies: cleaning the filter element and thoroughly cleaning the system. How often need to clean the filter? The frequency depends on the volume of the aquarium, the characteristics of its microclimate, as well as on the design of the filter unit.

Approximate cleaning intervals:

internal filter - once a week;
external filter - once or twice a month.

It is better to focus on the stream of water coming from the filter: if it is weakened, it’s time to start cleaning. The smaller the area of the filter element, the faster it becomes clogged.

A thorough washing of all parts is carried out as necessary.

Cleaning instructions

In order not to disturb the bio-balance in the aquarium, approach cleaning it consciously. The system contains 2 sponges made of waterproof foam. Rinsing them is very simple. Only one sponge is processed in one procedure: in the second, useful colonies of microorganisms remain. Sacks of peat for oxidation in a multi-sectional system are washed once every 2-3 weeks, gravel - once every 2 months.

Important
purityis.decorexpro.com/en/ magazine recalls: Do not use soap or detergents. Also, do not wash the filter in hot water. All this leads to the death of useful flora, the water in the aquarium becomes cloudy, incomprehensible mucus is formed, the fish get sick.

How to clean the filter system of the aquarium:

Washing must be carried out quickly. For cleaning, it is recommended to take water from the aquarium so as not to harm the bacterial colonies. The exception is fish disease: in this case, the water in the tank is replaced, and the filters are washed with clean water to kill pathogens.
Remove the filter from the aquarium and transfer it to the bathroom.
Disconnect the filter blocks, disassemble the safety cap, remove the motor with blades.
Rinse sponge, containers, cap, motor.
Reassemble clean parts in the reverse order and return the treatment system to its place.

Life hack
To thoroughly clean the inside of the mechanical block from mucus, use cotton swabs or a toothbrush.

The operation is carried out according to the same rules, regardless of the manufacturer, whether Aquael, ATAN or others

In the case when the filters were turned off for a long time, they are also washed before starting. This is necessary because of the state of bacteria in the system: without oxygen, these masses begin to decompose. If you ignore the process, dangerous compounds will fall into the water of the aquarium, which is fraught with diseases and even the death of its inhabitants.

Treat the aquarium ecosystem with due care, and then it will delight for a long time with its unique beauty.